Christie J series 2.4kW Einstellungsanleitung PDF herunterladen (Seite 30)

3-8 J Series 2.0, 2.4, and 3.0 kW Setup Guide

020-100751-01 Rev. 1 (10-2011)

Section 3: Operation

Lens H and Lens V

When adjusting the image for focus, zoom or horizontal and vertical positioning, use the specific arrow keys

EFT/RIGHT ARROW KEY or UP/DOWN ARROW KEY) related to each function. A small window will appear to

indicate the type of adjustment taking place. For example,

• Use the F

OCUS and the LEFT ARROW or RIGHT ARROW KEY to improve image clarity as desired.

• Use the Z

OOM and the LEFT ARROW or RIGHT ARROW KEY to achieve a desired image size.

• Use the L

ENS H and the LEFT ARROW or RIGHT ARROW KEY to position the image horizontally.

• Use the L

ENS V and the UP ARROW or DOWN ARROW KEY to position the image vertically.

Press E

XIT to return to a presentation level. NOTE: Use the LENS key (built-in keypad) with the general UP/

OWN ARROW KEY to get the same effect as if using the arrow keys related to “Lens V” or “Lens H” on the

Remote Keypad. All 4 lens settings can be adjusted by using the soft keys.

Laser

Press LASER to activate the laser pointer on the remote. Point the remote

at the screen to highlight an area of your presentation.

NOTE: Leave batteries in the wired remote keypad for the LASER key to

work.

3.2 Navigating the Menus

Main Menu

Most of the projector controls are accessed from

within the projector menu system. There are several

groups of related functions, with each group selectable

from the Main menu as shown at right. Press M

ENU at

any time to display this Main menu.

On the remote keypad, enter the number correspond-

ing to the function menu you wish to access, such as 2

for the Image Settings menu. Or use the U

P/DOWN

ARROW KEY on any keypad to highlight the desired

option, then press E

NTER. The corresponding function

menu or pull-down list of further options will appear.

With a function menu displayed, enter a menu option number for any numbered option, or use the U

P/DOWN

ARROW KEY to highlight the desired option and then press ENTER. Long menus have a scroll bar on the right—

use the arrow keys to access the remainder of the menu. Locked items or items that do not pertain to the current

action or condition appear dimmed and cannot be selected.

When finished with a function menu:

• Press E

XIT to return to the previous screen.

• Press M

ENU to leave the menu system and return to the presentation.

NOTES: 1) If there is no signal present, all source-dependent adjustments are disabled. 2) After 15 minutes of

inactivity, the projector leaves the menu system and returns to the presentation.

3) The Status menu is read-

only.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Christie J series 2.4kW Einstellungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Christie J series 2.4kW