Christie J series 2.4kW Einstellungsanleitung Seite 29
- Seite / 60
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Section 3: Operation
J Series 2.0, 2.4, and 3.0 kW Setup Guide 3-7
020-100751-01 Rev. 1 (10-2011)
IF WITHIN A PRESENTATION:
FIGURE 3-3
Press FUNC followed by two numeric
numbers to enable a specific color or colors in the display (see right). For
example,
will display only red, and will display
green data. Eliminating one or more colors can help with certain diagnostics
and setups, such as when accurately overlaying one image on top of another
from stacked projectors.
NOTE: Color enabling can also be implemented
from numerous locations within the menu system.
Press F
UNC followed by HELP to disable Keystone, Edge Blending and
Brightness Uniformity settings. This will disable the features without
changing the settings associated with them.
Projector
Press P
ROJ to access a specific projector within a group of projectors or to confirm if the local projector is
listening. The number in the “Enter Number” window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in the Menu Preferences menu.
The P
ROJ check box (read-only) shows whether or not the projector physically connected to a keypad is
listening to commands from that keypad. A checkmark means that connected projector is listening; if there is
no checkmark, you are communicating with a different projector.
To control a specific projector with the keypad, press P
ROJ and then enter the three-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are currently using, the
checkmark will disappear.
To broadcast to multiple projectors, press P
ROJ and then PROJ again without entering a projector number.
Keypad commands will then effect all projectors present.
NOTE: There is no method of controlling a group of
projectors within the same wired configuration using the wired keypad exclusively, since there is only one
wired protocol available.
NOTE: The address for the projector can be set in the Configuration Menu>
Communications Submenu.
Enter
Press E
NTER to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return
to the previous menu or image.
Exit
Press E
XIT to return to the previous level, such as the previous menu. NOTE: EXIT does not save changes within
text editing boxes (including number editing of a slide bar value) or within pull-down lists. It acts as a
“cancel” in these cases.
Arrow Keys
Use the L
EFT/RIGHT ARROW KEY to change a slide bar value or to select a different option within a pull-down
list without having to first scroll through options or navigate within a menu, pull-down list or text box.
- J Series 1
- 2.0, 2.4, and 3.0 kW 1
- NOTICES 4
- Table of Contents 5
- 1 Introduction 7
- 1.1.2 Key Features 8
- 1.2.1 General Precautions 9
- 1.2.2 AC /Power Precautions 9
- 1.2.3 Lamp Precautions 10
- 2 Installation and Setup 11
- FIGURE 2-2 12
- FIGURE 2-3 12
- FIGURE 2-4 13
- IGURE 2-5 14
- For 3000W Model 15
- IGURE 2-8 16
- 2.2.1 Mounting 17
- 2.2.2 Basic Optical Alignment 17
- FIGURE 2-9 18
- FIGURE 2-10 18
- FIGURE 2-11 FIGURE 2-12 19
- 2.2.4 Powering Down 20
- Status LEDs 21
- 3 Operation 23
- Remote Keypad 24
- Section 3: Operation 25
- FIGURE 3-2 25
- 3.1.1 Remote Keypad Commands 26
- NOTE: A new channel 27
- NOTES: 1) The LCD display 28
- IGURE 3-3 29
- 3.2 Navigating the Menus 30
- NOTES: 1) Press LEFT 32
- 2) Press EXIT while in 32
- 3.3 Alarms 34
- 4 Maintenance 35
- IGURE 4-1 36
- Section 4: Maintenance 37
- FIGURE 4-2 37
- FIGURE 4-3 37
- FIGURE 4-4 38
- FIGURE 4-5 38
- IGURE 4-6 39
- FIGURE 4-7 40
- FIGURE 4-8 41
- 5 Troubleshooting 43
- 5.3 LCD 44
- 5.4 Remote Keypad 44
- 5.5 OSD 45
- 5.6 Ethernet 45
- 5.7 Displays 45
- Section 5: Troubleshooting 46
- 5.7.14 Display is “Noisy” 47
- 5.8 Web Interface 48
- FIGURE 5-1 49
- 7 Specifications 51
- 7.4 Power Requirements 52
- Lens Throw Ratio 53
- 7.6 Regulatory 54
- 7.6.3 Marking 55
- Appendix A: GPIO 57
Verwandte Produkte und Handbücher für Datenprojektoren Christie J series 2.4kW
(96 Seiten)
(82 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.087 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern