Christie CP2215 Bedienerhandbuch PDF herunterladen (Seite 30)

Maintenance

CP2215 Quick Start Guide 26

020-101295-01 Rev. 2 (05-2014)

the reflector and guide the lamp onto the cathode clamp. Be careful not to hit the lamp against

the reflector.

5. Thread on and hand-tighten the cathode nut. Make sure the smooth portion of the nut is

against the cathode clamp.

6. Tighten the cathode clamp (F) with a hex key.

7. Align the ring terminal on the anode wire (B) with the mounting position ensuring the crimped

side of the wire is facing out. Tighten the anode screw.

Route anode lead away from nearby metal surfaces.

8. Close the lamp access door and tighten the 2 thumbscrews.

9. Close and lock the rear access door. Make sure the hex key is placed back into its holder before

closing the rear access door.

10. Connect the projector to AC power and then turn the projector on.

11. Tap Menu > Advanced Setup > Lamp Change Wizard.

12. Tap Next.

13. Complete these fields:

14. Tap Save.

15. Tap Next.

16. Align the lamp. See Align the Lamp with LampLOC on page 17.

Field Description

Type The lamp type.

Serial Number The lamp serial number.

Reason for Change The reason the lamp was changed.

Lamp Expiry (Hours) The number of hours the lamp can operate before replacement.

This field is auto-populated.

Hours Used The number of hours the lamp has operated before installation.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Keine Kommentare

Christie CP2215 Bedienerhandbuch Seite 30