Christie CP2215 Bedienerhandbuch PDF herunterladen (Seite 21)

Installation and Setup

CP2215 Quick Start Guide 17

020-101295-01 Rev. 2 (05-2014)

Add the Lamp Information to the Lamp History

1. If the lamp is on, tap the lamp off ( ) icon to turn it off.

2. Tap Menu > Advanced Setup > Lamp Change Wizard.

3. Tap Next.

4. Complete these fields:

5. Tap Save.

6. Tap Next.

Turn the Lamp On

On the projector touch panel controller (TPC) main screen, tap the lamp on ( ) icon.

Align the Lamp with LampLOC

To ensure optimal lamp performance and peak brightness at the screen for the life of the lamp, use

LampLOC to adjust the lamp position when you install a new lamp in the projector. After making the

adjustment, the lamp is well-centered and at the correct distance from the illumination system.

1. Turn the lamp on and open the douser.

Management IP The IP address where SNMP information and notifications are sent.

Download MIB to USB

Sends the SNMP Management Information Base (MIB) file to a USB flash

drive.

Apply Applies SNMP settings.

Serial Access

Grants access to serial connections.

Ethernet Access

Grants access to Ethernet connections.

Field Description

Type The lamp type.

Serial Number The lamp serial number.

Reason for Change The reason the lamp was changed.

Lamp Expiry (Hours) The number of hours the lamp can operate before replacement.

This field is auto-populated.

Hours Used The number of hours the lamp has operated before installation.

Field Description

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Keine Kommentare

Christie CP2215 Bedienerhandbuch Seite 21