RPMS-D100U/UF, CS50-D100U & CS70-D100U/UF User’s Manual Table of Contents NOTE: Due to constant research, the information in this manual is s
SOURCE SETUP RPMS, CS50 & CS70-D100U/UF User’s Manual 2-7 If you want to use an extra video source in addition to the video source(s) connected
Appendix B Auxiliary Fan Connector RPMS, CS50 & CS70-D100U/UF User’s Manual B-1
Appendix C Keypad Reference RPMS, CS50 & CS70-D100U/UF User’s Manual C-1 * indicates “Press and Hold” for approximately 1 second to activat
Appendix D Serial Communications Cables RPMS, CS50 & CS70-D100U/UF User’s Manual D-1 When connecting projector to a computer or another projec
Appendix D: SERIAL COMMUNICATION CABLES D-2 RPMS, CS50 & CS70-D100U/UF User’s Manual NOTE: RS-422 not available on all projector models – D100U pr
Appendix D: SERIAL COMMUNICATION CABLES RPMS, CS50 & CS70-D100U/UF User’s Manual D-3
Appendix D: SERIAL COMMUNICATION CABLES D-4 RPMS, CS50 & CS70-D100U/UF User’s Manual
Appendix E Optional Input Modules RPMS, CS50 & CS70-D100U/UF User’s Manual E-1 There are many optional input modules and accessories currently
Appendix E: OPTIONAL INPUT MODULES E-2 RPMS, CS50 & CS70-D100U/UF User’s Manual The RGB400 ALT Input Module may be installed in this projector, a
SOURCE SETUP 2-8 RPMS, CS50 & CS70-D100U/UF User’s Manual Figure 2.12. Connecting a Marquee Signal Switcher If you are using more than one Marqu
Appendix E: OPTIONAL INPUT MODULES RPMS, CS50 & CS70-D100U/UF User’s Manual E-3 PC250 Analog Features ◊ accepts VGA or MAC RGB video ◊ 15 pin
Appendix F Menu Tree RPMS, CS50 & CS70-D100U/UF User’s Manual F-1
Appendix F: MENU TREE F-2 RPMS, CS50 & CS70-D100U/UF User’s Manual
Index RPMS, CS50 & CS70-D100U/UF User’s Manual Index - 1 A Adjust Primary Colors, 3-49 Adjuster Mechanism, 3-2 Anamorphic, 3-20 Arrow Keys, 3
INDEX Index-2 RPMS, CS50 & CS70-D100U/UF User’s Manual Input Definition of, 3-12 Extra Video, 2-7 Optional, 2-7 Input Levels Setup of,
INDEX RPMS, CS50 & CS70-D100U/UF User’s Manual Index-3 Custom, 3-19 Default, 3-19 Presets, 3-19 RGBHV, 2-2 RS-232, 2-7, 2-10, 3-40, 3-48 RS-422,
SOURCE SETUP RPMS, CS50 & CS70-D100U/UF User’s Manual 2-9 Figure 2.13. Connecting to the RS-232 input connector When connecting multiple projec
SOURCE SETUP 2-10 RPMS, CS50 & CS70-D100U/UF User’s Manual Figure 2.15. Connecting RS-232 between multiple projectors Plug the projector’s line c
SOURCE SETUP RPMS, CS50 & CS70-D100U/UF User’s Manual 2-11 effective until the keypad is unplugged and plugged in again (if a wired remote) or u
SOURCE SETUP 2-12 RPMS, CS50 & CS70-D100U/UF User’s Manual Step 4: Set the Jumpers Set the jumpers as shown in Figure 2.18. Refer to the correct p
SOURCE SETUP RPMS, CS50 & CS70-D100U/UF User’s Manual 2-13 If desired, you can convert an IR remote keypad into a wired remote keypad and vice
Section 3 Operation RPMS, CS50 & CS70-D100U/UF User’s Manual 3-1 This section provides a general overview of the projector and a complete desc
OPERATION 3-2 RPMS, CS50 & CS70-D100U/UF User’s Manual Electronics Module (EM) The EM module contains the main electronics and input connectors of
Section 1 Introduction RPMS, CS50 & CS70-D100U/UF User’s Manual 1-1 GraphXMASTER RPMS-D100U/UF, CS50-D100U and CS70-D100U/UF products are ba
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-3 The projector is controlled via an IR remote keypad. The keypad accesses various menus in
OPERATION 3-4 RPMS, CS50 & CS70-D100U/UF User’s Manual 5. If you press a key while the projector is busy with another action, such as during a po
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-5 functions are disabled. To leave standby press and hold Stby* again (or use Stby* OFF). O
OPERATION 3-6 RPMS, CS50 & CS70-D100U/UF User’s Manual Contrast Press Cont to change the amount of white in your images. Use and until you rea
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-7 Function Key From presentation level, press Func followed by a 2-digit number to enable a
OPERATION 3-8 RPMS, CS50 & CS70-D100U/UF User’s Manual DisplayDisplay* and follow immediately with ON or OFF if you want to guarantee the correct
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-9 Figure 3.2. General Help Topics Whenever the projector is not at presentation level, suc
OPERATION 3-10 RPMS, CS50 & CS70-D100U/UF User’s Manual DOUBLE SLIDEBARS - In double slidebars, such as the Pixel Tracking / Pixel Phase double sl
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-11 Figure 3.3. Example of Pull-Down List Or, if you prefer to quickly scroll through a lis
OPERATION 3-12 RPMS, CS50 & CS70-D100U/UF User’s Manual PRESS Enter WHEN FINISHED: To accept the edits and move out of the edit window, press Ent
INTRODUCTION 1-2 RPMS, CS50 & CS70-D100U/UF User’s Manual The projector accepts an SXGA input signal from an external source. When in Dual Lamp o
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-13 new input signal based on its frequencies and polarities, and will automatically display
OPERATION 3-14 RPMS, CS50 & CS70-D100U/UF User’s Manual NOTES: 1) An automatic channel will be discarded unless one or more of its parameters are
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-15 Table 3.1. Abbreviations for Signal Type Abbrev. Signal Type 4WH Composite (4 wire) on
OPERATION 3-16 RPMS, CS50 & CS70-D100U/UF User’s Manual Figure 3.7. Copying A Channel TO DELETE A CHANNEL, highlight the desired channel in the C
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-17 Figure 3.9. Channel Edit Menu (SAMPLE) If desired, edit the following channel setups in
OPERATION 3-18 RPMS, CS50 & CS70-D100U/UF User’s Manual Most options for image adjustments can be accessed through two menus: Size and Position (
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-19 Resize Presets Applicable only to D100U models - use the pull down menu to quickly dis
OPERATION 3-20 RPMS, CS50 & CS70-D100U/UF User’s Manual such as video connected to INPUT 3 or INPUT 4, produce distorted images that are too tall
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-21 USING “TILED” RESIZE PRESETS – When you are working with a display wall you will want to
OPERATION 3-22 RPMS, CS50 & CS70-D100U/UF User’s Manual Vertical stretch – adjusts the height the image while keeping the width constant. Use Vert
Section 2 Source Setup RPMS, CS50 & CS70-D100U/UF User’s Manual 2-1 This section provides instructions on how to connect various sources to t
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-23 Figure 3.11. Adjust Filter NOTE: Filter affects only the current signal. H-Position – T
OPERATION 3-24 RPMS, CS50 & CS70-D100U/UF User’s Manual NOTE: Unavailable options appear grayed out. Tiling Setup This submenu provides options t
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-25 Brightness (SHORT CUT: Press Bright and adjust the slidebar.) Brightness increases or d
OPERATION 3-26 RPMS, CS50 & CS70-D100U/UF User’s Manual • Scan-doubled sync-on-green • Scan-quadrupled sync-on-green For these signals, change t
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-27 DEFAULT (default) – This setting provides good black levels and high contrast under opt
OPERATION 3-28 RPMS, CS50 & CS70-D100U/UF User’s Manual SELECT COLOR TEMP – The current color temperature is shown in the menu and can be changed
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-29 temperature that is similar to what you want. Adjust white levels from there as desired.
OPERATION 3-30 RPMS, CS50 & CS70-D100U/UF User’s Manual VIDEO TERMINATION - Enter a checkmark to terminate the video inputs 3 and 4 (75 Ω).
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-31 prefer to use the Input Levels menu (see Figure 3.15). These adjustments, which are actu
OPERATION 3-32 RPMS, CS50 & CS70-D100U/UF User’s Manual NOTES: 1) Input levels apply for the current source only, but for any color temperature us
SOURCE SETUP 2-2 RPMS, CS50 & CS70-D100U/UF User’s Manual Input 1 provides 5 BNC connectors for connecting to a variety of sources such as VGA, S
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-33 Figure 3.16.Adjusting Blacklevels by Enabling Peak Detector Processing Mode Found on t
OPERATION 3-34 RPMS, CS50 & CS70-D100U/UF User’s Manual interlaced signals, and the Motion filter will be applied for RGB HDTV interlaced sources.
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-35 Use the options in the Configuration menu to change system parameters to suit your prefe
OPERATION 3-36 RPMS, CS50 & CS70-D100U/UF User’s Manual DISPLAY CHANNEL – Enter a checkmark to display a list of channels that are available. Thes
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-37 Color and Uniformity Select Color and Uniformity to access sub-menus Color Temperature,
OPERATION 3-38 RPMS, CS50 & CS70-D100U/UF User’s Manual Figure 3.22. Enabling Brightness Uniformity TEST PATTERNS – Use this option to select a v
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-39 1.2.3.4.5.6.Test PatternFreeze ImageColor EnableOdd Pixel AdjustmentSync Noise MarginDig
OPERATION 3-40 RPMS, CS50 & CS70-D100U/UF User’s Manual DIGITAL NOISE MARGIN – Enabled for D100UF models only, this option allows you to set how s
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-41 NOTE: 1) The baud rate setting does not affect the switcher port, which is always 9600 b
OPERATION 3-42 RPMS, CS50 & CS70-D100U/UF User’s Manual accidentally disabling the wired keypad during use. Use the IR remote keypad to select OFF
SOURCE SETUP RPMS, CS50 & CS70-D100U/UF User’s Manual 2-3 Figure 2.3. Connecting Component Video Sources The DVI Input module installed in INPU
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-43 This read-only menu lists a variety of details about the standard and optional componen
OPERATION 3-44 RPMS, CS50 & CS70-D100U/UF User’s Manual The Lamp menu is accessible from the Main menu (item 5). It is comprised of read only inf
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-45 level is reached for both lamps. The power level you select will remain constant through
OPERATION 3-46 RPMS, CS50 & CS70-D100U/UF User’s Manual Figure 3.29. Relation between Lamp Operation Modes and Brightness A Note About Switching
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-47 Figure 3.30. LAMP HOURS – This read-only information indicates the number of hours logg
OPERATION 3-48 RPMS, CS50 & CS70-D100U/UF User’s Manual IMPORTANT Always record the serial number of a NEW lamp. LAMP OPERATION – This option is
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-49 Tiling Setup Enabled for D100U models only, the Tiling Setup menu allows you to define t
OPERATION 3-50 RPMS, CS50 & CS70-D100U/UF User’s Manual notice a slight posterized or banded effect in images. 6) It is recommended that you look
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-51 Figure 3.32. Enabling Primary Color Adjustment 2b) SELECT A “USER” COLOR TEMPERATURE (“U
OPERATION 3-52 RPMS, CS50 & CS70-D100U/UF User’s Manual 3f) ADJUST WHITES – Exit the main Adjust Primary Colors (CSC) menu to view all white fiel
SOURCE SETUP 2-4 RPMS, CS50 & CS70-D100U/UF User’s Manual NOTE: The DVI output connector (J94) on the output panel is used to connect the Projecti
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-53 STEP 1: General Setup 1a) Adjust primary colors (see Matching Colors in Multiple Screens
OPERATION 3-54 RPMS, CS50 & CS70-D100U/UF User’s Manual the screen) enough. In the White Uniformity menu Overall should be set to 50.0 or less. Do
OPERATION RPMS, CS50 & CS70-D100U/UF User’s Manual 3-55 No Signal The message "No signal" appears when there is no signal detected at
OPERATION 3-56 RPMS, CS50 & CS70-D100U/UF User’s Manual The specific pattern of flashing indicates the 2-digit code identifying the type of proble
Section 4 Maintenance & Troubleshooting RPMS, CS50 & CS70-D100U/UF User’s Manual 4-1 The projector is an internationally approved product
MAINTENANCE & TROUBLESHOOTING 4-2 RPMS, CS50 & CS70-D100U/UF User’s Manual ◊ Do not place the projector on an unstable cart, stand or table.
MAINTENANCE AND TROUBLESHOOTING RPMS, CS50 & CS70-D100U/UF User’s Manual 4-3 ◊ Do not place the projector over a radiator or heat register. The
MAINTENANCE & TROUBLESHOOTING 4-4 RPMS, CS50 & CS70-D100U/UF User’s Manual Table 4.1. Maintenance Guide Part Description Frequency How to cl
MAINTENANCE AND TROUBLESHOOTING RPMS, CS50 & CS70-D100U/UF User’s Manual 4-5 Replace the batteries in the keypad when required. Use 4 AA size a
MAINTENANCE & TROUBLESHOOTING 4-6 RPMS, CS50 & CS70-D100U/UF User’s Manual About the Lamp Hot-Swap Feature The projector is designed with the
SOURCE SETUP RPMS, CS50 & CS70-D100U/UF User’s Manual 2-5 Figure 2.7. Connecting Composite Video Sources Connect an S-Video input to either th
MAINTENANCE AND TROUBLESHOOTING RPMS, CS50 & CS70-D100U/UF User’s Manual 4-7 Replacing a Lamp 1) TURN PROJECTOR OFF: If your presentation allow
MAINTENANCE & TROUBLESHOOTING 4-8 RPMS, CS50 & CS70-D100U/UF User’s Manual 3) REMOVE LAMP: Loosen the two screws securing the lamp in the lam
MAINTENANCE AND TROUBLESHOOTING RPMS, CS50 & CS70-D100U/UF User’s Manual 4-9 4) INSERT NEW LAMP: a) Hold the new replacement lamp above the lam
MAINTENANCE & TROUBLESHOOTING 4-10 RPMS, CS50 & CS70-D100U/UF User’s Manual performed a hot-swap, use the Lamp menu to return to the original
MAINTENANCE AND TROUBLESHOOTING RPMS, CS50 & CS70-D100U/UF User’s Manual 4-11 8. Is the “Status” LED flashing a pattern of yellow and red light
MAINTENANCE & TROUBLESHOOTING 4-12 RPMS, CS50 & CS70-D100U/UF User’s Manual 3. The gamma setting may be inadequate. It is recommended that th
MAINTENANCE AND TROUBLESHOOTING RPMS, CS50 & CS70-D100U/UF User’s Manual 4-13 3. Is the video input signal properly terminated? Set in Image se
MAINTENANCE & TROUBLESHOOTING 4-14 RPMS, CS50 & CS70-D100U/UF User’s Manual There is noticeable flicker effects in the display… 1. Try turnin
Section 5 Specifications RPMS, CS50 & CS70-D100U/UF User’s Manual 5-1 NOTES: 1) Due to continuing research, specifications are subject to chan
SPECIFICATIONS 5-2 RPMS, CS50 & CS70-D100U/UF User’s Manual Brightness Uniformity (single lamp mode) • FOR RPMS > 90%, adjustable to 100% unif
SOURCE SETUP 2-6 RPMS, CS50 & CS70-D100U/UF User’s Manual Figure 2.9. Composite Video Loop Through VIDEO TERMINATION: In the Video Options menu (
SPECIFICATIONS RPMS, CS50 & CS70-D100U/UF User’s Manual 5-3 Analog Inputs VESA Standards Supported Resolution 1280 x 960 1280 x 1024 Pixel
SPECIFICATIONS 5-4 RPMS, CS50 & CS70-D100U/UF User’s Manual Temperature 10°C to 35°C Operating Humidity 25% to 65% non-condensing Altitude
SPECIFICATIONS RPMS, CS50 & CS70-D100U/UF User’s Manual 5-5 For CS50 Weight (without screen, top cover, pedestal or packaging) 217 lbs. Size
SPECIFICATIONS 5-6 RPMS, CS50 & CS70-D100U/UF User’s Manual EN55022 (CISPR 22) for Information Technology Equipment, Conducted and Radiated, Class
Appendix A Glossary RPMS, CS50 & CS70-D100U/UF User’s Manual A-1 This appendix defines the specific terms used in this manual as they apply to
Appendix A: GLOSSARY A-2 RPMS, CS50 & CS70-D100U/UF User’s Manual A menu item that indicates whether an option is currently in effect (checked) or
Appendix A: GLOSSARY RPMS, CS50 & CS70-D100U/UF User’s Manual A-3 screens with gain more than 1 direct more incident light to the audience but h
Appendix A: GLOSSARY A-4 RPMS, CS50 & CS70-D100U/UF User’s Manual When light from a projector is incident on a screen, the light reflects from the
Appendix A: GLOSSARY RPMS, CS50 & CS70-D100U/UF User’s Manual A-5 The maximum number of alternate white and black horizontal lines that can be d
Appendix A: GLOSSARY A-6 RPMS, CS50 & CS70-D100U/UF User’s Manual 3) "Separate sync" or "H.SYNC and V.SYNC": the horizontal
Kommentare zu diesen Handbüchern