Christie CS70-D100U Bedienungsanleitung PDF herunterladen (Seite 9)

SOURCE SETUP

2-6

RPMS, CS50 & CS70-D100U/UF User’s Manual

Figure 2.9. Composite Video Loop Through

VIDEO TERMINATION: In the Video Options menu (Image Settings), make sure Video

Termination is checked for the final projector only. All other projectors must have

this option unchecked in order for the signal to continue. For other types of display

devices in the chain, typically a “Hi-Z” switch position is needed.

S-Video Loop Through

CONNECTIONS: From your source, connect an S-video source signal to INPUT 4 using

either the 4-pin mini DIN or the 2 adjacent BNCs labeled Y and C. Connect a second

cable from whichever

INPUT 4 connector is free to one of the S-video inputs of the

next display device or projector. Continue this looping method for each projector,

using either 4-pin mini DIN or the 2 adjacent BNCs as input into

INPUT 4, then using

the other connector(s) as an output (i.e., loop through). Whether you use 4-pin mini

DIN or the 2 adjacent BNCs as input or output depends on the type of cable you have

on hand and what type of connectors are on each end.

Figure 2.10. S-Video Loop Through

VIDEO TERMINATION: In the Video Options menu (Image Settings), make sure Video

Termination is checked for only the final projector. All other projectors must have

this option unchecked in order for the signal to continue. For other types of display

devices in the chain, typically a “Hi-Z” switch position is needed.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 115 116

Keine Kommentare

Christie CS70-D100U Bedienungsanleitung Seite 9