Christie Christie HD Einstellungsanleitung PDF herunterladen (Seite 26)

3-4 M Series Setup Guide

020-100011-06 Rev. 1 (05-2013)

Section 3: Operation

3.1.3 Wired Remote

You can convert the remote keypad into a wired remote keypad using the cable provided with the projector.

Connect one end into the remote and the other to the XLR connector on the input panel labeled as wired

keypad. The wired remote is recommended when:

• The built-in keypad is inaccessible

• The lighting conditions are unsuitable for proper IR transmission

NOTE: Leave the batteries in the wired remote for the laser pointer key to work.

3.1.4 Built-in Keypad

The built-in keypad has a LCD status display window which displays all states of the keypad controls. The

LCD displays status information when the projector is powering up “Warm up: Lamp is warming up” and

when the projector is cooling down “Cool down: Lamp is cooling down.” The display shows the state of the

keys, menu structure, and menu items.

3.1.5 Overview of LED and Key States

The LED color of the keys indicates that the key is in one of these states:

• Amber: A functionality is available that will affect the displayed image of the projector

• Blue: A functionality is available that is relevant to the built-in LCD only and will not affect the displayed

image from the projector

• Off: The key is disabled in the current context

• Power Key: Used to switch from Standby mode to ON, and from ON to Standby mode; LED always

remains Amber

FIGURE 3-2 BUILT-IN KEYPAD

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 53 54

Keine Kommentare

Christie Christie HD Einstellungsanleitung Seite 26